1 Series E81 130i (N52K) 3-door
11 12 719
Resurfacing cylinder head sealing face
(N52K)
Necessary preliminary tasks:
•
Remove cylinder head
•
Remove exhaust camshaft.
•
Remove intermediate lever on inlet side
Check evenness of cylinder head sealing faces with a standard
straight-edge (1).
Note:
Max. deviation from level (longitudinal) 0.10 mm
Check evenness of cylinder head sealing faces with a standard
straight-edge (1).
Note:
Max. deviation from level (transversal) 0.05 mm
Check cylinder head for water leaks.
Assemble engine.
RA Resurfacing cylinder head sealing face (N52K)
BMW AG - TIS
22.01.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -