1 Series E81 130i (N52K) 3-door
Drive belt routing E90, E91, E92, E93, E81, E82, E88
Note:
Mark the direction of rotation of the drive belt if it is to be reused.
Turn belt tensioner (4) in direction of arrow until bore (2) is flush
on housing.
Hold belt tensioner (4) under tension.
Load is removed from tensioning pulley.
Course of E85 drive belt:
Turn belt tensioner (1) in direction of arrow until bore is flush on
housing.
Hold belt tensioner (1) under tension.
Load is removed from tensioning pulley (2).
All:
Secure belt tensioner (1) with special tool 11 3 340 .
Remove drive belt upwards.
Assemble engine.
Installation:
Check drive belt for correct installation position and, if reusing,
observe direction of rotation. Risk of damage.
RA Replacing alternator drive belt (N52K)
BMW AG - TIS
22.01.2013 03:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
