1 Series E81 130i (N52K) 3-door
11 31 005
Checking timing of camshaft(s) (N52K)
Special tools required:
•
11 0 300
•
11 4 281
•
11 4 282
•
11 4 283
Necessary preliminary tasks:
•
Remove cylinder head cover
•
Remove underbody protection.
Remove fastener (1) in direction of arrow.
Installation:
Install fastener (1) with bore facing outwards.
Rotate crankshaft at central bolt into TDC position.
Slide special tool 11 0 300 in direction of arrow into special tool
bore and secure crankshaft.
Important!
On vehicles with optional extra SA205 (automatic
transmission), there is a large bore for the TDC position
shortly before the special tool bore. This bore can be
confused with the special tool bore.
If the flywheel is secured in the correct special tool bore with
special tool 11 0 300 , the engine can no longer be moved at
the central bolt.
RA Checking timing of camshaft(s) (N52K)
BMW AG - TIS
22.01.2013 03:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
