1 Series E81 130i (N52K) 3-door
Rotate crankshaft at central bolt into TDC position.
Slide special tool 11 0 300 in direction of arrow into special tool
bore and secure crankshaft.
Important!
On vehicles with optional extra SA205 (automatic
transmission), there is a large bore for the TDC position
shortly before the special tool bore. This bore can be
confused with the special tool bore.
If the flywheel is secured in the correct special tool bore with
special tool 11 0 300 , the engine can no longer be moved at
the central bolt.
Important!
Do not remove special tool 11 0 300 to release central
bolt (1).
Employ a second person for gripping when releasing central
bolt (1).
Screw special tool 11 9 280 onto hub of vibration damper.
Release central bolt (1).
Tightening torque 11 21 1AZ
.
Remove hub towards front.
Open plug (1).
Tightening torque 11 31 7AZ
.
Open plug (1).
Tightening torque 11 11 7AZ
.
Installation:
Replace aluminium screws.
RA Replacing timing chain (N52K)
BMW AG - TIS
22.01.2013 03:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
