1 Series E81 130i (N52K) 3-door
Warning!
Risk of injury in event of incorrect use.
Important!
Improper handling. Risk of damage!
Secure both bearing pins (2) in torsion springs with knurled
screw (1) of special tool 11 4 270 .
Important!
Check torsion spring on intermediate lever to ensure correct
installation position.
Press special tool 11 4 270 in direction of arrow as far as it will
go.
Insert screw (2) of torsion spring.
Tightening torque 11 37 2AZ
.
To avoid jamming of screw (2) with torsion spring, it is necessary
when inserting screw (2) to increase pretension on special tool
11 4 270 uniformly.
Important!
Thread on cylinder head. Risk of damage!
Remove special tool 11 4 270 .
At cylinder no. 3, adjust oil spray nozzle (2) so that oil
spray points precisely towards spline teeth (3).
Insert screw (1) with oil spray nozzle (2) (external).
Tightening torque 11 37 4AZ
.
Assemble engine.
RA Removing and installing/replacing intermediate levers (N52K)
BMW AG - TIS
22.01.2013 03:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
