1 Series E81 130i (N52K) 3-door
12 61 285
Replacing engine oil level sensor (N52, N52K,
N51, N46, N54, N53)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Switch off ignition
•
E60 / E63 / E64 / E83 / E85 / E86 / E70 only:
Remove reinforcement plate
•
E70 / E81 / E87 / E90 / E91 / E92 / E93 only:Remove
underbody protection
•
Drain off engine oil
Unlock plug (1) and remove.
Unscrew nuts.
Tightening torque 12 61 2AZ
.
Remove oil level sensor (2).
Installation:
Clean sealing face on oil sump.
Replace seal on oil level sensor.
An excessively low torque value will result in oil leaks.
An excessively high torque value will result in damage to the oil
level sensor.
Top up engine oil.
RA Replacing engine oil level sensor (N52, N52K, N51, N46, N54, N53)
BMW AG - TIS
22.01.2013 03:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
