Removing & Installing Electronics Box for 1 Series E81 130i (N52K)
Unlock device holder (2) at holder (1) and remove.
Remove DME control unit (3).
Unlock device holder (2) at holder (1) and remove.
Remove device holder (1) from electronics box.
Release screws (1).
Replacement:
Modify water drain valve (2) and bump stop (3).
RA Removing and installing/replacing electronics box
BMW AG - TIS
22.01.2013 03:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
