1 Series E81 130i (N52K) 3-door
Release screws (1) and remove cover (2) from right side of fuel
tank.
USA national version:
Disconnect plug connection (1).
Unlock and detach vent lines (2).
If necessary, remove fuel line for independent heating.
ECE national version:
Disconnect plug connection (1).
Unlock and detach vent line (2).
If necessary, remove fuel line for independent heating.
Release screw cap with special tool 16 1 020 and remove
service cap.
Installation:
Procedure for tightening screw cap, see next work step.
RA Removing and installing or replacing fuel gauge sensor (petrol/gasoline, right)
BMW AG - TIS
22.01.2013 03:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
