bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Draining And Adding Coolant (N52, N52K, N51, N53)|Page 538 > < 1 RA Instructions For Working On Cooling System|Page 536
Page 1
background image

17 00 005

Draining and adding coolant (N52, N52K, N51,
N53)

Warning!

Danger of scalding!

These tasks on the cooling system should only be carried out
on an engine that has cooled down!

Important!

Lifetime coolant filling:

If removing radiator, oil-water heat exchanger or transmission
oil cooler, do not reuse drained coolant!

Installation:

Use only recommended coolant.

Observe mixture ratio (antifreeze/water).

Recycling

Catch and dispose of drained coolant in a suitable container.

Observe country-specific waste-disposal regulations.

Risk of slipping due to coolant on the floor.

Necessary preliminary tasks:

Follow instructions for working on cooling system

Remove front underbody protection

RA  Draining and adding coolant (N52, N52K, N51, N53)

BMW AG - TIS

22.01.2013  04:00

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Draining And Adding Coolant (N52, N52K, N51, N53)|Page 538 > < 1 RA Instructions For Working On Cooling System|Page 536