1 Series E81 130i (N52K) 3-door
Draining coolant:
Open cap (1) on coolant expansion tank (2).
Installation:
Close cap (1) until the arrow marks line up.
Unlock lugs (1) on front axle carrier and remove radiator
cover (2) in direction of arrow.
If fitted, release drain plugs (1) on radiator at bottom. On coolant
radiators which do not have a drain plug, remove coolant hose.
Drain, catch and dispose off coolant.
Installation:
Replace sealing rings.
Tightening torque 17 11 2AZ
.
Unfasten and detach coolant hose (1) from thermostat housing.
Drain, catch and dispose off coolant.
RA Draining and adding coolant (N52, N52K, N51, N53)
BMW AG - TIS
22.01.2013 04:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
