1 Series E81 130i (N52K) 3-door
22 11 110
Replacing left engine support arm
(N51/N52/N52K/N53)
Necessary preliminary tasks:
-
Remove underbody protection at front and rear
-
Secure engine in installation position
-
Remove intake filter housing
-
Remove reinforcement strut (E90/91/92 only)
-
Remove V-strut (E93 only)
Release grounding strap from engine support arm.
Release clamp from fuel hose of engine support arm.
If necessary, release screw (1).
Release corrugated tube (2) from retainer.
Release screws (3).
Remove engine support arm.
Installation:
Aluminium screws/bolts must be replaced.
Tightening torque 22 11 3AZ
RA Replacing left engine support arm (N51/N52/N52K/N53)
BMW AG - TIS
22.01.2013 04:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
