1 Series E81 130i (N52K) 3-door
22 32 050
Replacing cross-member for transmission
mounting
Necessary preliminary tasks:
•
Remove underbody protection
•
Support transmission with lifter.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 24 71 1AZ/2AZ
.
Note:
Illustration similar.
RA Replacing cross-member for transmission mounting
BMW AG - TIS
22.01.2013 04:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -