1 Series E81 130i (N52K) 3-door
24 00 050
Installing replacement transmission
(GA6L45R)
Drain automatic transmission fluid at oil drain plug.
Tightening torque: 24 11 6AZ
.
Recycling:
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations
Important!
-
Before installing replacement transmission, always flush
transmission fluid cooler together with lines.
-
After completion of work, check transmission fluid level.
Replacement transmission is supplied filled with
transmission fluid.
Use only the approved transmission fluid.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Remove transfer case (AWD)
•
Remove automatic transmission
RA Installing replacement transmission (GA6L45R)
BMW AG - TIS
22.01.2013 04:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
