1 Series E81 130i (N52K) 3-door
Unscrew all bolts.
Remove transmission sump (1).
Installation:
Screw in bolts (1 to 17) in specified order until bolt heads make
contact.
Tightening torque: 24 11 5AZ
.
Clean sump magnet (1) and check for metal filings/borings.
Remove gasket (2) from transmission sump.
Clean sealing faces and groove with a cloth.
Insert new gasket in transmission sump groove.
Important!
Do not degrease transmission sump with cleaning agent.
Installation:
The gasket is correctly installed when it is engaged in the locating
openings of the transmission sump.
RA Removing and installing/sealing or replacing transmission sump (GA6L45R)
BMW AG - TIS
22.01.2013 04:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
