1 Series E81 130i (N52K) 3-door
25 11 245
Replacing shift arm support bearing
Necessary preliminary tasks:
•
If necessary, remove reinforcement carrier.
•
Remove rear underbody protection.
•
If necessary, release middle heat shield, do not remove.
Note:
Only if heat shield has to be released.
Release nut (1) and remove bracket from rear differential.
Slide heat shield towards rear.
Lever support bearing (1) with a short screwdriver out of
mounting.
Pull support off shift arm.
Installation:
Grease bearing pin of shift arm.
Fit support bearing (1) with opening (2) towards top rear
onto mounting.
RA Replacing shift arm support bearing
BMW AG - TIS
22.01.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
