1 Series E81 130i (N52K) 3-door
25 11 071
Replacing knob for shift lever
Warning!
As from 03/07 there are two different versions. Version 2 can
give rise to damage if incorrectly removed.
Version 1:Shift lever knob and shift lever cover separate.
Version 2:Shift lever knob and shift lever cover are a single
part.
Version 1 (shift lever knob and shift lever cover separate):
Press installation frame of gaiter (1) together a little and remove
gaiter from centre console.
Important!
Start removing at front left, otherwise the frame may be
damaged.
Note:
Do not twist shift lever knob during removal as this would
cause the turning lock in the knob to shear off.
Tug firmly to remove knob.
Installation:
Fit shift lever knob on shift lever, align and press on until it
snaps noticeably into place.
Installation:
Push gaiter (1) down until groove (2) is fully exposed.
RA Replacing knob for shift lever
BMW AG - TIS
22.01.2013 04:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
