1 Series E81 130i (N52K) 3-door
25 11 101
Replacing shift rod
Necessary preliminary tasks:
•
Remove rear assembly underside protection
•
Remove reinforcement carrier on underbody
•
Remove exhaust system (M3 only)
•
Remove heat shields
•
Remove transfer case (AWD)
•
Remove transmission cross-member.
•
Remove transmission support block (M3 only)
Detach locking clip.
Pull shift rod (1) out of shift rod joint (2).
Installation:
Grease shift rod pin (3).
Detach locking clip (1).
Remove selector rod (2).
Installation:
Grease selector rod pin.
RA Replacing shift rod
BMW AG - TIS
22.01.2013 04:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -