1 Series E81 130i (N52K) 3-door
31 12 138
Replacing rubber mounts on both tension
struts
Special tools required:
•
31 3 031
•
31 3 032
Important!
The rubber mounts on both tension struts must be replaced!
Note that the rubber mounts may only be changed once.
Necessary preliminary tasks:
•
Check ball joints of tension struts while installed, replace
tension struts if necessary
•
Remove tension struts
Important!
If the tension struts already feature an identification mark with
a centre punch, it is necessary to replace both tension struts.
Mark tension struts with a punch mark in area (A).
RA Replacing rubber mounts on both tension struts
BMW AG - TIS
22.01.2013 04:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
