1 Series E81 130i (N52K) 3-door
31 33 001
(Removing and installing) replacing front left
or right spring strut support bearing
Note:
Procedure is described in the document "Replacing front left or
right spring strut".
Replacement:
Vehicle with spacer ring:
Note:
Spacer ring (A) is fitted in vehicles with "rough road package"
version.
Unscrew nuts.
Remove spacer ring (A) from support bearing.
Installation:
Align spacer ring (A) using centering pin (1) to support bearing
and place in position.
Replace self-locking nuts.
Tightening torque 31 31 1AZ
.
If necessary, twist/drive out centering pin (1).
Note:
If a support bearing (2) was fitted without centering pin (1), the
centering pin (1) of the new support bearing (2) must be driven
or twisted out.
RA (Removing and installing) replacing front left or right spring strut support bea
BMW AG - TIS
22.01.2013 04:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
