1 Series E81 130i (N52K) 3-door
•
Attach quick-clamping holder/quick-clamping unit to vehicle
and remove clamping levers in area of front wheels
•
Attach pickup to quick-clamping holder/quick-clamping unit,
align using bubble level and connect to rotary plates
Note: When using quick-clamping units, perform rim runout
compensation after installing the pickups.
•
If necessary, attach spoiler adapter.
•
If necessary, switch on chassis alignment system
•
Enter customer and vehicle data
•
Identify chassis version and select vehicle
•
Enter tyre pressure and tread depth
•
Move vehicle into design position
•
Install brake tensioner.
RA KDS chassis/wheel alignment check with load up to design position
BMW AG - TIS
22.01.2013 05:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
