bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Replacing Intake Line For Power Steering (N51, N52, N53)|Page 954 > < 10 RA Removing And Installing _ Replacing Fluid Reservoir For Power Steering With Acti|Page 952
Page 1
background image

32 41 311

Replacing intake line for power steering (N51,
N52, N53)

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Close off pipe connections with plugs.

Recycling:

Catch and dispose of hydraulic fluid in a suitable container.

Observe country-specific waste-disposal regulations

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Remove intake filter housing

Release hose clamp (1) and detach suction line (2) from fluid
reservoir.

Installation:

Make sure suction line is laid without tension and with sufficient
spacing to adjoining components.

RA  Replacing intake line for power steering (N51, N52, N53)

BMW AG - TIS

22.01.2013  05:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Replacing Intake Line For Power Steering (N51, N52, N53)|Page 954 > < 10 RA Removing And Installing _ Replacing Fluid Reservoir For Power Steering With Acti|Page 952