1 Series E81 130i (N52K) 3-door
33 33 001
Replacing left or right rear axle carrier
compression strut
Important!
Observe safety instructions for raising the vehicle
Driving without torque reactor struts and tension strut is not
permitted!
Risk of damage!
The rear axle carrier must be supported at the front if both
compression struts have to be replaced!
Necessary preliminary tasks:
•
Remove rear lip
Release screw (1).
Tightening torque 33 32 12AZ
.
Release screws (2).
Installation:
Replace screws.
Tightening torque 33 33 2AZ
.
Release screw (4) and remove compression strut (3).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 33 33 1AZ
.
RA Replacing left or right rear axle carrier compression strut
BMW AG - TIS
22.01.2013 05:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -