1 Series E81 130i (N52K) 3-door
34 00 025
Replacing fluid in ABS/ASC+T brake system
Note:
Read and comply with General Information.
Important!
When carrying out repairs to the brake system, follow the
procedure set out in Bleeding brake system with DSC.
Unclip retaining tabs (1).
Pull cover (3) out of guide (2) and remove.
Connect brake fluid changer to expansion tank and switch on.
Note:
Check relevant Operating Instructions for each device.
Charging pressure should not exceed 2 bar.
RA Replacing fluid in ABS/ASC+T brake system
BMW AG - TIS
22.01.2013 05:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
