1 Series E81 130i (N52K) 3-door
34 00 513
Checking parking brake setting (vehicle
check for service)
Important!
Follow instructions for Brake testing on test stand.
Note:
If deviations are identified during the following check, the
parking brake must be adjusted:
0th tooth (handbrake released):
Vehicles with manual transmission: Shift lever in neutral
position.
Vehicles with automatic transmission: Selector lever in "N"
position.
-
Without locking differential
≤
150 N.
-
With locking differential
≤
200 N (possibly odd display).
1st tooth: No increase in braking force with regard to 0th tooth.
Indicator lamp can be lit.
2nd tooth: Indicator lamp must be lit.
3rd tooth: Increase in braking force.
5th tooth: The brake force display must have reached
≥
400 N.
Checking brake force differential at wheel:
Apply handbrake until a wheel circumferential force (measured on
brake test stand) of min. 1000 N is reached.
Max. permitted brake force differential right/left
≤
35 % (referred
to greater brake value).
It must be possible to brake with locked wheels with the
handbrake.
RA Checking parking brake setting (vehicle check for service)
BMW AG - TIS
22.01.2013 05:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
