1 Series E81 130i (N52K) 3-door
34 41 120
Removing and installing or replacing both
handbrake Bowden cables
Special tools required:
•
32 1 030
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove airbag control unit
After completing work:
•
Adjusting handbrake
Release handbrake lever.
Lock adjuster unit (ASZE).
Using special tool 32 1 030 , press stop (1) of adjusting spring
back to such an extent that retaining hook (2) engages in
stop (1).
Installation:
Unlock adjuster unit (ASZE).
Lever out restraining hook (2) with a suitable screwdriver.
Restraining hook (2) must detach from stop (1) of adjusting
spring.
RA Removing and installing or replacing both handbrake Bowden cables
BMW AG - TIS
22.01.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
