1 Series E81 130i (N52K) 3-door
35 40 001
Removing and installing or replacing
accelerator pedal module
Take off cap.
Release screw.
Pull accelerator pedal module upwards out of fixture.
Installation:
Tightening torque 35 40 1AZ
.
Pull off plug (1).
Remove accelerator pedal module.
Important!
Accelerator pedal module can only be replaced completely
with adapter plate.
RA Removing and installing or replacing accelerator pedal module
BMW AG - TIS
22.01.2013 06:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
