1 Series E81 130i (N52K) 3-door
To reset, press the on-board computer button on the direction
indicator/main-beam switch until the message "RESET" appears.
Resetting is confirmed by pressing the on-board computer button
for a slightly longer period.
A clock is displayed during resetting.
A check/tick is displayed after "RESET" on successful resetting.
Repeat the procedure for each additional service which is to be
reset.
The month and year are displayed in order to reset the statutory
vehicle inspection.
Press on-board computer button.
Change month with rocker switch on direction indicator/main-
beam switch.
Press on-board computer button to confirm.
Change year with rocker switch on direction indicator/main-beam
switch.
Press on-board computer button to confirm.
CBS reset with diagnosis system
Important!
To be able to check and/or correct the car's on-board date
properly, the diagnosis system requires the correctly set tester
system date!
The jobs may only be reset after the service measure has
been completed.
The brake pads can only be reset with a new brake pad wear
sensor.
RA CBS reset
BMW AG - TIS
22.01.2013 06:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
