1 Series E81 130i (N52K) 3-door
36 12 005
Replacing a runflat tyre
Follow the fitting machine manufacturer's operating instructions.
It is absolutely essential to ensure that the equipment is in proper
working condition and that there is no damage to the disc wheel
and tyre.
After completion of work, balance wheels.
Important!
Only fitting machines which are approved for fitting runflat
tyres may be used!
Please refer to the operating instructions of the respective
fitting machine for details of the exact fitting procedure.
Use only BMW-approved plastic-covered tyre irons.
Use only BMW-approved tyre mounting paste.
For approved wheel/tyre combinations, tyre makes and
optional extras, refer to KSD CD.
Note:
Pay attention to different tyre markings:
-
Item (1) Marking denoting BMW-approved tyres. Ensure that
only BMW-approved tyres are fitted.
-
Item (2) RSC is the abbreviation for Runflat System C
omponent (runflat tyres).
-
Item (3) Outside. The tyre must be fitted so that the wording
Outside is always situated on the outside of the rim.
Important!
Many tyres are directional!
The arrow on the tyre must point in the direction of travel for
each wheel!
RA Replacing a runflat tyre
BMW AG - TIS
22.01.2013 06:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
