1 Series E81 130i (N52K) 3-door
41 00 ...
Riveting steel parts
1.0 Recommended tools and equipment
-
Manual riveting tool for blind rivet nuts and bolts.
2.0 Setting blind rivet nuts and blind rivet bolts:
-
Drill holes (0.2 mm larger than the outside diameter of the blind rivet nuts or blind rivet bolts).
-
Blind rivet nuts and bolts must have a special coating for corrosion reasons.
See Aftersales Assistance Portal (ASAP) - Service/Technical - Workshop Equipment (Start BMW) - Shop
Workshop Equipment or at www.bmwgroup-wep.com
Use the blind rivet nuts and bolts supplied in the case of the manual riveting tool for steel only!
-
Insert blind rivet nuts or bolts and tighten down with the riveting tool.
RA Riveting steel parts
BMW AG - TIS
22.01.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
