1 Series E81 130i (N52K) 3-door
41 00 ...
Welding in reinforcement plate (steel plate)
In the case of a partial replacement piece, a body component is
cut at a point described in the repair instructions.
A reinforcement plate is welded in to ensure sufficient strength.
Follow notes for welding steel parts.
Note:
The following illustrations serve as general illustrations of
reinforcement plate repair work. They are applicable to all cutting
repairs.
Mark component in accordance with distance A and cut.
Cut new part (1) in accordance with cut and if necessary adjust to
fit with straightening attachment or universal mount.
Installation:
Adhere to a gap at severance cut of approx. one to max. two
material thicknesses in order to ensure welding with the
reinforcement plate and to facilitate a more tolerant fit.
Clean inner and outer sides of connecting areas (1) on new part
and (2) on body.
Coat inner sides with welding primer.
RA Welding in reinforcement plate (steel plate)
BMW AG - TIS
22.01.2013 06:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
