1 Series E81 130i (N52K) 3-door
4.
Clean component, eliminate paintwork damage if necessary
If the rivet shank can be removed:
Important!
To avoid corrosion, stop chips/swarf by means of cavity
sealing.
Follow instructions on corrosion protection.
5.
Preserving cavity
If the rivet shank cannot be removed:
Warning!
Risk of injury!
Observe notes on cavity foam.
Important!
To avoid corrosion and rattling noises, stop chips/swarf and
rivet nut shank with cavity foam.
Remove foam remnants with isohexane (cleaning-grade
petroleum spirit).
5.
Stop rivet shank by means of specific foaming
Note:
Fit rivet nut as quickly as possibly, ideally before the cavity foam
hardens.
RA Repair solution for straight shank/hexagon rivet nut
BMW AG - TIS
22.01.2013 06:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
