bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

35 RA Notes On Cavity Foam|Page 1317 > < 34 RA Repair Solution For Straight Shank_hexagon Rivet Nut|Page 1315
Page 1
background image

41 07 100

Notes on cavity foam

Warning!

Cavity foam is damaging to health and highly flammable!

Empty the can completely immediately after use. Foam
material set even in the can. There is therefore a danger of
bursting as a result of foam expansion, even when the can is
partly empty.

Protection measures!

Wear protective goggles

Wear solvent-resistant protective gloves

Recycling:

Not fully emptied and unused cans with elapsed expiry dates must
be treated as special waste.

Foam which has set can be disposed of as residual waste.

Observe country-specific waste-disposal regulations.

Important!

Do not fill cavity completely (risk of damage).

Foam expands while it sets by several times over (volume
change). Setting takes approx. 30 minutes. Mechanical
processing (e.g. drilling, cutting, etc.) is then possible.

RA  Notes on cavity foam

BMW AG - TIS

22.01.2013  06:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

35 RA Notes On Cavity Foam|Page 1317 > < 34 RA Repair Solution For Straight Shank_hexagon Rivet Nut|Page 1315