1 Series E81 130i (N52K) 3-door
41 00 ...
General cementing instructions
Important!
Conform with safety precautions!
.
-
The bonding surfaces must be kept free of all types of dirt and contamination. Avoid leaving fingerprints.
-
Cleanliness is the golden rule for all bonds!
-
Cleaning agent: isohexane
Expiry date of adhesive:
-
The adhesive cartridge is marked with a date.
-
Do not use the adhesive after this date.
2-component adhesive application:
-
Insert adhesive cartridge in adhesive gun, remove cap and allow some adhesive to emerge. Strip adhesive
components uniformly and attach mixing tube.
-
Allow approx. 1 mixer length of mixed adhesive to emerge (there must be no smearing of colours). Only then apply
the mixed adhesive to one side of the bonding surface.
Adhesive disposal:
-
Hardened adhesive is disposed of as normal waste.
-
Empty adhesive cartridges are disposed of as normal waste.
-
Non-hardened adhesives and mixtures of adhesive and solvent and the like must be disposed of as hazardous
waste.
These regulations apply to the Federal Republic of Germany.
For other countries, comply with the (possibly differing) nationally applicable regulations.
RA General cementing instructions
BMW AG - TIS
22.01.2013 06:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
