1 Series E81 130i (N52K) 3-door
41 11 023
Replacing front section of engine support to
left wheel arch
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 023).
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs.
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Wheel arch, front
-
(2) Support carrier, wheel arch, outer
Open weld joints in area (1).
Installation:
Weld new components in areas (2) additionally.
Apply window glass adhesive to cavity acoustic baffle (3).
Mark severance cut (1) in accordance with measurement a and
cut engine carrier.
Important!
Cut outer metal sheet only.
Measurement a=130 mm from front edge of sleeve
Installation:
Weld in reinforcing panels at all severance cuts.
RA Replacing front section of engine support to left wheel arch
BMW AG - TIS
22.01.2013 06:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
