1 Series E81 130i (N52K) 3-door
41 21 510
Replacing front left door pillar (front side
panel removed)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 21 510).
Spot-weld bonding is used on the E87. Observe specific
procedure.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs!
Place vehicle on straightening bench.
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) A-pillar, outer
-
(2) Support carrier, wheel arch, outer
-
(3) Shaped part, support carrier, wheel arch (not shown)
-
(4) Shaped part, A-pillar, inner (not shown)
Mark severance cuts in accordance with specified measurements and cut.
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
22.01.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -