1 Series E81 130i (N52K) 3-door
Measurement a = approx. 90 mm from edge of opening.
Mark severance cut (2) in accordance with measurement and cut.
Important!
Cut outer metal sheet only.
Measurement b = approx. 220 mm from centrepoint of 25 mm dia. bore.
Open weld joints in areas (3).
Remove cavity acoustic baffles (4).
Installation information:
-
Attach new cavity acoustic baffles with window adhesive in areas (4).
-
Weld in reinforcing panels at all severance cuts.
Open weld joints in area (1).
Mark severance cut in accordance with specified measurement
and cut.
Measurement a = approx. 60 mm from centrepoint of 20 mm
dia. bore.
Open weld joints in areas (1).
Installation:
Weld new components in areas (2) additionally.
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
22.01.2013 06:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
