1 Series E81 130i (N52K) 3-door
41 61 000
Removing and installing hood/bonnet
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 61 000).
Necessary preliminary tasks:
•
Disconnect all cable plug connections
Important!
For the following work step, secure the engine hood against
falling closed.
Disconnect gas-pressure damper from engine hood (1).
Loosen screws (2).
Release screws (3).
Tightening torque 41 61 1AZ
.
Note:
This work step must be carried out with a second person
assisting.
Remove hood lid.
Installation:
Install engine hood at screw locations to on hinge. This dispenses
with the need for adjustment after installation.
If this is not possible, adjust engine hood.
RA Removing and installing hood/bonnet
BMW AG - TIS
22.01.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
