1 Series E81 130i (N52K) 3-door
51 24 004
Adjusting rear lid lock
Prerequisite:
Rear lid must be correctly adjusted to fit; if necessary, adjust rear
lid.
For ideal adjustment, refer to Body gap dimensions.
Remove protective cap (1).
Screw in bump stop (2) fully on left/right.
Unclip cover (1).
Slacken screws (2) in lower section of rear lid lock (1) until it is
just able to move and centres itself.
Installation:
Check slides (4) on lower section of rear lid lock (1) for damage,
replace if necessary.
Important!
Lock pin (3) must not brush against upper rear lid lock
section.
RA Adjusting rear lid lock
BMW AG - TIS
22.01.2013 07:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
