1 Series E81 130i (N52K) 3-door
51 21 330
Removing and installing/replacing window
cavity cover strip on inner front door
Important!
The "Instructions on fitting window guides" serve as the basis
for this repair instruction and must be observed without fail.
Necessary preliminary tasks:
•
Remove outer window cavity cover strip
•
Remove front door trim
Pop window cavity cover strip (1) in direction of arrow out of front
door.
Installation:
Moulded section (1) and retaining elements (2) of window cavity
cover strip (3) must not be damaged.
Moulded section (1) must be correctly fed into door.
Moisten window cavity cover strip (3) prior to fitting with
approved anti-friction agent .
RA Removing and installing/replacing window cavity cover strip on inner front door
BMW AG - TIS
22.01.2013 07:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
