1 Series E81 130i (N52K) 3-door
51 48 060
Removing and installing/replacing sound
insulation in left or right front door
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove door trim panel
If necessary, disconnect plug connection (1).
Using special tool 00 9 317 , lever out sealing bead (2)
completely or if necessary partially.
Feed cable (3) out of sound insulation (4) and remove sound
insulation (4).
Installation:
Ensure clean bonding and that there are no leaks at sealing bead.
Installation:
In case of replacement or partial detachments, lay butylene tape
(sourcing reference: BMW Parts Service) depending on the
conditions on inner door panel or sound insulation.
Seal cable penetrations with butylene tape.
RA Removing and installing/replacing sound insulation in left or right front door
BMW AG - TIS
22.01.2013 07:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
