bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Instrument Panel Trim|Page 1722 > < 2 RA Replacing Side Cover On Instrument Panel|Page 1720
Page 1
background image

51 45 030

Removing and installing instrument panel
trim

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Note:

Observe the following instructions to facilitate removal of the
instrument panel trim:

Move front seats back completely and lower

Move steering column into "lower" and "extended" position

Note:

Description is shown on the E87 by way of example. There may
be differences in detail in the case of other models.

Necessary preliminary tasks:

Disconnect battery negative lead

Remove both trims for front roof pillar

Remove trim for instrument panel at bottom left

Remove instrument cluster

Remove insert for radio control key

Remove Start/Stop switch

Remove steering column cover

Remove centre console switch centre

Remove operator unit for heater/air conditioner

Remove right glovebox with housing

Remove airbag module on front passenger side

Remove storage compartment

In appropriate version:

Remove radio receiver

Remove Car Communication Computer

Remove Central Information Display

Remove audio system controller

RA  Removing and installing instrument panel trim

BMW AG - TIS

22.01.2013  07:40

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing Instrument Panel Trim|Page 1722 > < 2 RA Replacing Side Cover On Instrument Panel|Page 1720