1 Series E81 130i (N52K) 3-door
Only when fitting retaining rings:
Remove left footwell side trim panel.
Drive through pins (1).
Fold carpet (2) inwards slightly and remove pins (1).
Installation:
Heat footrest (1) with hot air blower and apply adhesive bead
along dashed line (2) with hot-melt adhesive gun.
Place footrest (1) on carpet and stick on.
Press footrest (1) down until adhesive bead has cooled down.
RA Replacing footrest for front passenger compartment
BMW AG - TIS
22.01.2013 07:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
