1 Series E81 130i (N52K) 3-door
51 43 075
Removing and installing / replacing side trim
panel, footwell, on A-pillar, right
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove front entrance cover strip (inside)
Detach mucket (1) in area of side trim panel (2).
Unclip side trim panel (2) with special tool
00 9 317 in
direction of arrow at retaining points (3) and remove.
Installation:
If necessary, lever out clips (1) remaining in bores.
If necessary, replace faulty clips (1).
Position side trim panel (2) preinstalled with clips (1) on
associated bores and clip into place.
RA Removing and installing / replacing side trim panel, footwell, on A-pillar, righ
BMW AG - TIS
22.01.2013 07:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
