bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Removing And Installing_replacing Tension Strut On Left Or Right Spring Strut Do > < 12 RA Removing And Installing_replacing Front Left Or Right Wheel Arch Cover (rear Sec
Page 1
background image

51 71 041

Removing and installing/replacing rear left or
right wheel arch cover

Note:

Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.

Necessary preliminary tasks:

If necessary, remove left or right rear wheel

 

Note:

Work shown on the E87 by way of example, deviations in detail
are possible in other models.

Release screws (1 and 2).

Release nuts (3) and expander rivet (4).

Carefully feed out wheel arch cover (5) towards bottom.

 

Installation:

If necessary, replace expander rivet (4).

Ensure wheel arch cover (5) is correctly seated.

RA  Removing and installing/replacing rear left or right wheel arch cover

BMW AG - TIS

22.01.2013  07:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Removing And Installing_replacing Tension Strut On Left Or Right Spring Strut Do > < 12 RA Removing And Installing_replacing Front Left Or Right Wheel Arch Cover (rear Sec