1 Series E81 130i (N52K) 3-door
51 71 371
Removing and installing/replacing tension
strut on left or right spring strut dome
Special tools required:
•
00 9 120
Important!
Risk of damage!
Driving without the tension strut is not permitted as otherwise
the body may be damaged.
Tension strut screws must be tightened to torque and then
tightened down with special tool 00 9 120 .
Important!
Risk of damage!
Catch (2) and seal (3) of cover (1) must not be damaged.
Even a minimally damaged cover (1) may result in water
leaking in; if necessary, replace cover (1).
Note:
Two possible versions of cover (1):
A) Turn cover (with notch) approx. 45
°
counterclockwise
B) Snap out cover (without notch) in upward direction
Remove cover (1) and release screw underneath.
RA Removing and installing/replacing tension strut on left or right spring strut do
BMW AG - TIS
22.01.2013 07:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
