bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Left Spring Support Passage Cover > < 4 RA Removing And Installing_replacing Cover For Carbon Canister
Page 1
background image

51 71 ...

Removing and installing/replacing left or right
steering gear cover

Necessary preliminary tasks:

If necessary, remove left or right front wheel.

Note:

Description is shown on the E82 by way of example. There may
be differences in detail in the case of other models.

Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.

The operation is described on the left side; proceed in the same
way for the right side.

Note:

Spring strut removed for purposes of clarity.

Release screw (1) and plastic nuts (2).

Feed out cover (3) and remove.

 

Installation:

Observe notes on fitting cover (3).

RA  Removing and installing/replacing left or right steering gear cover

BMW AG - TIS

22.01.2013  07:55

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Left Spring Support Passage Cover > < 4 RA Removing And Installing_replacing Cover For Carbon Canister