1 Series E81 130i (N52K) 3-door
51 71 ...
Removing and installing/replacing radiator
seal
Warning!
Scalding hazard!
Only perform work after engine has cooled down.
Important!
Observe safety instructions for raising the vehicle
Necessary preliminary tasks:
•
Remove front underbody protection
Note:
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
Release screws (1).
If necessary, remove underbody protection bracket.
Release catches (2) and feed out radiator seal (3) towards rear.
RA Removing and installing/replacing radiator seal
BMW AG - TIS
22.01.2013 07:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
