1 Series E81 130i (N52K) 3-door
Release bolt (1).
Tightening torque 52 10 06AZ
.
Note:
Trim (2) is engaged in marked area.
Press lock (3) and pull trim (2) off seat mechanism.
If necessary, lever out carefully with special tool 00 9 317 .
Model with lumbar supports:
Unfasten plug connection (1) and disconnect.
Replacement only:
Unlock catches (1) on left and right and remove switch (2) from
trim (3).
RA Removing and installing/replacing outer cover on left or right front seat backre
BMW AG - TIS
22.01.2013 07:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
