1 Series E81 130i (N52K) 3-door
If necessary, move carriage towards rear slightly.
Insert connecting element (1) into guide rail.
Engage connecting element (1) in carriage (2).
Turn control lever (3).
Insert control lever (1) in opening.
Note:
Spacer (1) of control lever must be situated in guide channel.
Move connecting element towards rear.
Clip in garage.
Assemble glass slide/tilt sunroof and carry out function check.
Initialize glass slide/tilt sunroof.
RA Removing and installing/replacing connecting element pair for glass slide/tilt s
BMW AG - TIS
22.01.2013 08:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -