1 Series E81 130i (N52K) 3-door
-
Phone numbers:
•
BMW Group Mobile Service
•
BMW Hotline
•
Customer's home dealer
The country-specific phone numbers are contained as reference texts in the BMW diagnosis system (read off
during the input prompt). The phone numbers must be input with the international dialling code.
-
Legally prescribed vehicle inspection (country-specific):
•
Coding or blanking out
•
Interval for calculating the target date
The target date is calculated on the basis of the date of first registration.
-
Legally prescribed exhaust emissions test (country-specific):
•
Coding or blanking out
•
Interval for calculating the target date
The target date is calculated on the basis of the date of first registration.
Note: Automatic function after installation of the BMW diagnosis system.
The standardized data are automatically established when the pre-delivery check is carried out for the first
time. It is therefore not necessary to input the data separately.
Service function: Reset CBS Condition Based Service
A maintenance scope can be reset with the "Reset CBS Condition Based Service" service function. Even when
availability is over 80 %.
The benefit of reset via the BMW diagnosis system is that the on-board date is corrected automatically.
The individual maintenance scopes are displayed in the BMW diagnosis system with service counter and availability.
-
The service counter is reset by one counter on resetting. All service counters are set to "1" on new vehicles.
The service counters are used in the Service Acceptance/Reception Module (SAM) on a scope-specific basis for
controlling additional work.
-
Availability is set to 100 % on resetting. Availability in % is the wear value of the maintenance scope.
The greater the availability, the longer it is to the next maintenance scope.
0 % means that the maintenance measure must be carried out.
Service function: CBS Correction Vehicle Data
Important! The data are overwritten.
Once this service function has been executed, it is no longer possible to reconstruct the previous status.
The "CBS Correction Vehicle Data" service function is available if a reset has been carried out erroneously. In this
way, the availability of a maintenance scope can be corrected to a realistic value.
A data or a mileage/kilometre reading is entered for correction. These data are converted internally into an availability
in %. In so doing, the BMW diagnosis system only accepts a smaller value as the current reading in the control unit. In
RA Diagnosis for Condition Based Service
BMW AG - TIS
22.01.2013 08:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
